Geometry
106 definitions in this topic.
- Acute angleAn acute angle is an angle that measures more than 0 degrees and less than 90 degrees.
- Acute angled triangleAn acute triangle (or acute-angled triangle) is a triangle whose three angles are all acute, meaning each one…
- AdjacentIn geometry, the term adjacent is usually used to describe two angles or two sides of a polygon that are next…
- Adjacent anglesAdjacent angles are two angles in a plane that have a common side and a common vertex.
- Alternate exterior anglesAlternate exterior angles are formed when a line, called transversal, cuts or intersects two or more lines.
- Alternate exterior angles theoremThe alternate exterior angles theorem states that if a transversal intersects or cuts two lines that are…
- Alternate interior anglesAlternate interior angles are pairs of angles that lie between two lines and on opposite sides of a…
- Alternate interior angles theoremThe alternate interior angles theorem states that if a transversal intersects or cuts two lines that are…
- Altitude of a geometric figureThe altitude of a geometric figure is a line segment that shows the figure's height.
- Altitude of a triangleThe altitude of a triangle is the segment from the vertex of the triangle and perpendicular to the opposite…
- AngleAn angle is a figure formed by two rays that share the same endpoint. The shared endpoint is called the…
- Angles of elevation and depressionThe angles of elevation and depression are two angles that are formed when an object is located above or below…
- ApexThe apex of a geometric figure is its highest point, such as the vertex at the top of a cone, a pyramid or a…
- Area of a plane figureThe area of a plane figure is the space enclosed by the plane figure. In other words, the area is the amount…
- AxiomAn axiom or postulate is an accepted statement that requires no proof. In fact the word axiom comes from the…
- Base of a plane figureThe base of a plane figure is the side on which the figure " sits ." You could also say that it is the bottom…
- BisectIn geometry, to bisect is to divide a geometric figure such as a line, an angle or any other shape into two…
- Center of a circleThe center of a circle is a point inside the circle that is located at the same distance from all points on…
- Center of a sphereThe center of a sphere is a point inside the sphere that is located at the same distance from all points on…
- Chinese tangramThe Chinese tangram is a Chinese mathematical puzzle made of seven flat shapes called tans. To make a tangram…
- Chord of a circleA chord of a circle is a line segment whose two endpoints both lie on the circle.
- Circular arcA circular arc or simply arc is a part of a circle or the curve between any two points on a circle. In the…
- Common vertexA common vertex is a vertex that is shared by two or more angles.
- Converse of a conditional statementThe converse of a conditional statement switches the hypothesis and the conclusion.
- Coordinate systemA rectangular coordinate system refers to two number lines that intersect at right angles. The figure below…
- Coordinates of a pointThe coordinates of a point refer to the ordered pair (x, y) describing the location of the point in the…
- Corresponding anglesCorresponding angles are pairs of angles in matching positions where a transversal crosses two lines.
- CounterexampleA counterexample is any example proving that a statement is false. You only need one counterexample to prove…
- DecagonA decagon is a polygon with 10 sides and 10 angles. A decagon can either be regular or irregular.
- DiagonalFor a polygon, a diagonal is a line segment connecting two nonadjacent vertices or two vertices that are not…
- Diameter of a circleThe diameter of a circle is a line segment that passes through the center of the circle and has both endpoints…
- EndpointAn endpoint in math is a point that is located at the end of a line segment or ray.
- Equilateral triangleAn equilateral triangle is a type of triangle that has all sides of equal length and all angles of equal…
- FaceIn geometry, a face is any of the two-dimensional flat surfaces of a solid figure. For example, one face of a…
- FlipA flip, also called a reflection, moves a figure over a line to make its mirror image.
- GeometryGeometry is a branch of mathematics that focuses on the study of points, lines, angles, surfaces, and solids.
- Golden rectangleA golden rectangle is a rectangle whose length divided by its width equals the golden ratio, about 1.618.
- HemisphereA hemisphere is exactly half of a sphere, made by cutting the sphere through its center with a flat plane.
- HexagonA hexagon is a polygon with six sides. Here are some examples of hexagons.
- HypotenuseThe hypotenuse is the longest side of a right triangle. It is the side opposite the right angle.
- Inductive reasoningInductive reasoning is a type of reasoning that is based on patterns you observe. Then, based on your…
- Intersecting linesIntersecting lines are two or more lines that cross or meet at a point. That point is called the point of…
- IsometryAn isometry, also called isometric transformation, is a transformation in which a figure and its image are…
- Isosceles trapezoidAn isosceles trapezoid is a trapezoid whose two non-parallel sides (the legs) have the same length.
- Isosceles triangleAn isosceles triangle is a triangle that has at least two sides of equal length.
- KiteA kite is a quadrilateral with two pairs of equal adjacent sides: two equal sides next to each other, and…
- Length of a circular arcThe length of a circular arc, also called arc length , can be defined as a fraction of a circle's circumference.
- LineIn geometry, a line is a straight path of points that extends forever in both directions.
- Line of symmetryA line of symmetry is a line that divides a figure into two halves that match exactly.
- Line segmentA line segment is part of a line consisting of two endpoints and all points between these endpoints. In the…
- Math compassA compass is a geometry tool used to draw circles and parts of circles, called arcs.
- Median of a triangleThe median of a triangle is the line segment connecting the midpoint of a side and the opposite vertex. The…
- Midpoint of a line segmentThe midpoint of a line segment is the point that is located halfway between the endpoints. You can use the…
- NetIn math, a net is a two-dimensional pattern that can be cut and folded to form a three-dimensional space figure.
- Oblique angleAn oblique angle is any angle that is not a right angle or a multiple of a right angle. In other words, it is…
- Obtuse angleAn obtuse angle is defined as an angle that measures less than 180 degrees, but more than 90 degrees.
- Obtuse triangleAn obtuse triangle is a triangle with one obtuse angle, an angle greater than 90°.
- OctagonAn octagon is a polygon with 8 sides and 8 angles. The name came from the Greek prefix octa meaning 8 and the…
- Ordered pairAn ordered pair is a set of two numbers that identifies the location of a point on a coordinate plane. There…
- OriginThe origin is the point where the x-axis and the y-axis cross on the coordinate plane. Its coordinates are…
- Parallel linesParallel lines are lines in the same plane that never meet or intersect, no matter how far they are extended.
- Parallel planesParallel planes are planes in space that never intersect, no matter how far they are extended.
- ParallelogramA parallelogram is a quadrilateral with both pairs of opposite sides parallel.
- Perfect square numberA perfect square number, also called square number, is the number that you get when you multiply some counting…
- Perimeter of a shapeThe perimeter of a shape is the sum of the lengths of all the sides of the shape. For example, find the…
- Perpendicular planesPerpendicular planes are two planes that intersect at a right angle (90°).
- PlaneIn geometry, a plane is a perfectly flat surface that has no thickness and extends forever in all directions.
- Plane shapeA plane shape, also called two-dimensional shape or plane figure, is a geometric figure that is completely…
- Plotting a pointPlotting a point in the coordinate plane refers to locating and marking the point on the coordinate plane…
- PolygonA polygon is a closed plane figure with at least three sides that are segments.
- ProtractorA protractor is a tool used to measure and draw angles in degrees.
- Pythagorean theoremThe Pythagorean theorem states that in any right triangle, the square of the hypotenuse equals the sum of the…
- QuadrantA quadrant is one of the four regions of the coordinate plane, separated by the x-axis and the y-axis.
- QuadrilateralA quadrilateral is a polygon with four sides, four vertices and four angles.
- RadiusThe radius of a circle is any line segment from the center of the circle to a point on the circle.
- RayIn geometry, a ray is a set of points that is part of a line. A ray has one endpoint and extends in one…
- RectangleA rectangle is a two-dimensional closed figure with four sides and four right angles. The word rectangle can…
- Rectangular prismA rectangular prism is a prism whose base is a rectangle and the sides are also rectangles. The figure below…
- Rectangular pyramidA rectangular pyramid is a pyramid whose base is a rectangle and whose four side faces are triangles that meet…
- Reflex angleA reflex angle is an angle whose measure is greater than 180 degrees but smaller than 360 degrees. The angle…
- Right angleA right angle is an angle that measures exactly 90 degrees. The figure below is an example of a right angle.
- Right scalene triangleA right scalene triangle is a scalene triangle that has exactly one right angle.
- Same side interior anglesSame-side interior angles are two angles that lie between two lines cut by a transversal, on the same side of…
- Same-side exterior anglesSame-side exterior angles are two angles that lie outside two lines cut by a transversal, on the same side of…
- Scalene triangleA scalene triangle is a triangle with all three sides of different lengths.
- Similar figuresSimilar figures are figures that have the same shape, but not necessarily the same size. In the figure below…
- Skew linesSkew lines are lines in space that do not lie in the same plane. Moreover, they are not parallel and they do…
- Slope of a lineThe slope of a line is the ratio of the rise to the run between any two points (x1, y1) and (x2, y2).
- Space figureA space figure is a three-dimensional geometric shape that takes up space, so it has volume. For example, a…
- SphereA sphere is a perfectly round three-dimensional shape. Every point on its surface is the same distance from…
- SquareA square is a two-dimensional closed figure with four equal sides and four right angles. In other words, a…
- Standard form of an equation of a circleThe standard form of an equation of a circle with center (h,k) and radius r is (x - h)2 + (y - k)2 = r2
- Straight angleA straight angle is an angle that has a measure of 180 degrees. The figure below shows an angle whose measure…
- Surface areaThe surface area of a solid figure is the total area of all its outside surfaces.
- TessellationA tessellation, or tiling, is a pattern of shapes that covers a flat surface with no gaps and no overlaps.
- TetrahedronA tetrahedron, also called a triangular pyramid, is a solid with exactly four triangular faces.
- TheoremA theorem is a mathematical statement that has been proven to be true, using definitions, accepted facts and…
- TransversalA transversal is a line that crosses two or more other lines in the same plane at different points.
- TrapezoidA trapezoid is a quadrilateral with exactly one pair of parallel sides.
- VertexThe vertex is a point where two or more sides or edges of a geometric figure intersect.
- Vertical anglesVertical angles are angles that are on the opposite sides of two lines that intersect. In the figure below…
- Volume of a space figureThe volume of a space figure is how much space the figure occupies. For example, as you blow air inside a…
- X-coordinateThe x-coordinate of a point, also called abscissa, is the first number in an ordered pair. It indicates a…
- Y-coordinateThe y-coordinate of a point is the second number in an ordered pair. It indicates a distance along the y-axis…
- Zero-dimensionalSomething is zero-dimensional if it has no length, no width and no height. In geometry, a point is…
- Zone of a sphereA zone of a sphere (or spherical zone) is the curved surface of a sphere between two parallel planes that cut…